Well, we will begin slowly. As in my set the basis wasn’t, I cut out him from plywood 3mm. From outside, where the deck will be glued, I have lined places of joints of deck boards. Also from a dense black cardboard thickness 0,5-0,6mm cut a strip for imitation of a caulking iron between boards. As boards I use laths of a light pear of 11х1,5 mm.
At first we paste a lath. Then to an end face we paste a cardboard strip. And afterwards to this lath/cardboard the following lath. At end faces the same technology.
Personally I began to cut off the acting part of a cardboard after a sticker of three rows of laths. It is so more convenient to me. It is also possible to correct something.
In this part so far all.
Recent Comments